Command Reference Guide

122 ● display voice subscriber-line 3Com Router 5000 Family and Router 6000 Family
Command Reference
View This command can be used in the following views:
■ Any view
Description Use the display voice subscriber-line command to view the subscriber
line configuration.
This command applies to E1 and T1 voice.
The command display voice subscriber-line e1-number:ts-set-number is
mainly used to display the Timeslot set corresponding to the E1 subscriber line,
whether to adopt the private-line auto-ring connection and connection number, the
subscriber line description, whether to start the echo cancellation function and echo
cancellation sampling time length, and whether to start the comfort noise function.
The command display voice subscriber-line e1-number:15 is mainly used
to display the configuration information of the subscriber line corresponding to the
ISDN PRI set, the command
display voice subscriber-line t1-number:23 is
mainly used to display the configuration information of the subscriber line
corresponding to the ISDN PRI set, such as whether to adopt the private-line auto-ring
connection, subscriber line description, whether to start the echo cancellation
function and set echo cancellation sampling time length, input gain and output
attenuation, whether to adopt the nonlinear processing in echo cancellation, the time
of waiting for the initial number and the dial-up time interval between numbers, etc.
comfort noise The comfort noise of the subscriber line
The voice line was The signaling type of the subscriber line
this subscriber line The connection method of the subscriber line
receive gain The receive gain of the subscriber line
transmit gain The transmit gain of the subscriber line
first-dial timer The timeout value after the subscriber dials the first digit
dial-interval Timer The timeout value between dialing the first digit and dialing the
second digit
Table 1 Field description on voice subscriber-line configuration
Field Description