Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display voice subscriber-line ● 121
Command Reference
display voice subscriber-line
Purpose Use the display voice subscriber-line command to view the subscriber
line configuration.
Syntax display voice subscriber-line e1-number : { ts-set-number | 15 }
display voice subscriber-line t1-number : 23
Parameters e1-number, t1-number
Indicate the number of subscriber line generated in
creating the Timeslot set or the ISDN PRI set.
ts-set-number
Indicate the number of the Timeslot set created
successfully.
15
Indicate the subscriber line is generated in creating the
ISDN PRI set on E1 subscriber line.
23
Indicate the subscriber line is generated in creating the
ISDN PRI set on T1 subscriber line.
Example Display the configuration about voice subscriber-line 1/0/0:0.
[Router] display voice subscriber-line 1/0/0:0
The voice line was ds0
this subscriber line was not set connection
The subscriber line’s descrition:
echo cancellation enable
echo cancellation coverage 16
comfort noise enable
PCM companding type :A-law
[Router] display voice subscriber-line 1:15
The voice line was pri
this subscriber line was not set connection
The subscriber line’s descrition:
echo cancellation enable
echo cancellation coverage 16
music threshold is -38
receive gain 0
transmit gain 0
first-dial timer 10
dial-interval Timer 10
PCM companding type :A-law
Table 1 Field description on voice subscriber-line configuration
Field Description
The voice line The signaling type of the subscriber line
this subscriber line The connection method of the subscriber line
The subscriber line’s
description
The description of the subscriber line
echo cancellation The echo cancellation configuration of the subscriber line
echo cancellation
coverage
The echo cancellation coverage of the subscriber line