Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display voice subscriber-line ● 119
Command Reference
display voice subscriber-line
Purpose Use the display voice subscriber-line command to view the configuration
information about the type, status, codec mode, input gain and output attenuation
of the subscriber line.
Syntax display voice subscriber-line line-number
Parameters line-number
Subscriber line number.
Example Display the configuration information about the subscriber line.
[Router] display voice subscriber-line 0
Current information --- line: 0
Type = LINE FXO
Status = OPEN -- CH_IDLE
Coding =
Decoding =
CallerNum =
CalledNum =
Call-ID = 0
Call-Refer = 0
CNG = ON
EchoCancel = ON - 32 (ms)
Reset = 0
Position = Slot 2 Port 0
CID-Display = ENABLE
CID-Receive = ENABLE
Gain(R&T) = 0 (db) - 0 (db)
T_FirstDial = 10 (s)
T_DialInter = 10 (s)
T_RingBack = 60 (s)
T_WaitDigit = 5 (s)
T_Predial = 1 (s)
T_DTMF = 120 (ms)
T_Interdigit= 120 (ms)
Tabl e 1 Description on voice subscriber-line configuration
Field Description
line Index of voice subscriber-line
type Type of voice subscriber-line
state Status of voice subscriber-line
Status information Calling status of voice subscriber-line
Coding Coding type of voice subscriber-line
Decoding Voice decompression method of voice subscriber-line
CallerNum Calling number of current call
CalledNum Called number of current call
Call-ID Identifier of current call
Call-Refer Call reference of current call