Command Reference Guide
3Com Router 5000 Family and Router 6000 Family display voice rcv statistic r2 ● 113
Command Reference
display voice rcv statistic r2
Purpose Use the display voice rcv statistic r2 command to view the information
of call statistics related to the R2 signaling in the RCV module.
This command applies to E1 voice only.
This command is used to display the interactive messages between the RCV module
and the R2 signaling module, including the number of sending the messages of the
connection request to acknowledge success and fail, the number of sending the
messages of activation acknowledgement of success and failure, the number of
sending the messages of on-hook and off-hook, the number of receiving the
messages of connection request, the number of receiving activation messages, and
the number of receiving such messages as release, ringing, and unknown.
Syntax display voice rcv statistic r2
Parameters None
Example Display the information of R2 signaling call statistics in RCV module .
[Router] display voice rcv statistic r2
Statistic between RCV and R2 :
{
Send_R2_ConnectReqAck_SUCCESS : 0
Send_R2_ConnectReqAck_FAIL : 0
Send_R2_ActiveAck_SUCCESS : 0
Send_R2_ActiveAck_FAIL : 0
Send_R2_Onhook : 0
Send_R2_Offhook : 0
Send_R2_IPAlerting : 0
Recv_R2_ConnectReq : 0
Recv_R2_Active_TD_IN : 0
Recv_R2_Active_TD_OUT : 0
Recv_R2_Active_ELSE : 0
Recv_R2_Release : 0
Recv_R2_Alert_AP_ALERTING : 0
Recv_R2_Alert_ELSE : 0
Recv_R2_Unknow : 0
}
Table 1 Field description of R2 signal call statistics in RCV module
Field Description
Send_R2_ConnectReqA
ck_SUCCESS
Number of sending connection request success-acknowledge
message to R2 module
Send_R2_ConnectReqA
ck_FAIL
Number of sending connection request failure-acknowledge
message to R2 module
Send_R2_ActiveAck_SU
CCESS
Number of sending activation success-acknowledge message to R2
module
Send_R2_ActiveAck_FAI
L
Number of sending activation failure-acknowledge message to R2
module
Send_R2_Onhook Number of sending onhook message to R2 module