Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display voice rcv ccb ● 109
Command Reference
display voice rcv ccb
Purpose Use the display voice rcv ccb command to view the information related to
the call control block in the RCV module.
This command is used to display the information related to the incoming and
outgoing call control block, the connection status of modules, the caller status, the
caller numbers and the called numbers, etc.
Syntax display voice rcv ccb
Parameters None
Example Display the information related to the call control block in the RCV module.
[Router] display voice rcv ccb
RCV : CCB [ 1 ]
{
CallID : 0x0043
CallState : TALK
VCCID : 0x004f
VCCpState : IPPS_CONNECTED
CCID : 0xffff
CCState : CCS_CONNECTED
VasID : 0xffff
CallType : OUTGOING
CallAttribute : 0x00000000
CallSignaling : 0x00000002
EncodeType : 0x0000001f
E1Slot : 0xffffffff
E1Port : 0xffffffff
TimeSlot : 0xffffffff
ChannelID : 0x00000003
VpuState : VS_CONNECTED
VccTimer : 0x00000000
CcTimer : 0x00000000
VpuTimer : 0x00000000
CcChanMsg : 0x00000000
E1ChanMsg : 0x00000000
CallerNumber : 111
CalledNumber : 660010
prev : 0x00000000
next : 0x01409500
}
RCV : CCB [ 2 ] {
CallID : 0x0042
CallState : TALK
IppID : 0x004e
IppState : IPPS_CONNECTED
CcID : 0xffff
CcState : CCS_CONNECTED
VasID : 0x0039
CallType : INCOMING
CallAttribute : 0x00000000