Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display voice r2 call-statistics ● 107
Command Reference
display voice r2 call-statistics
Purpose Use the display voice r2 call-statistics command to view the R2 call
statistics.
This command applies to E1 voice only.
Syntax display voice r2 call-statistics
Parameters None
Example Display the information of R2 signaling call statistics.
[Router] display voice r2 call-statistics
[ E1-Group(0:0) Call Statistics ]
+-------------------------------------------------+
[Call sumcount] -> 4
[call success] -> 4
[Call failure] -> 0
[Call-in count] -> 1
[Call-in success] -> 1
[Call-in failure] -> 0
[Call-in answer] -> 0
[Call-in nullnum] -> 0
[Call-out count] -> 3
[Call-out success] -> 3
[Call-out failure] -> 0
[Call-out answer] -> 3
[Call-out busy] -> 0
[Call-out nullnum] -> 0
[Call-out congestion] -> 0
Table 1 R2 signaling call statistics field description
Field Description
Call sumcount Total number of calls: total number of calls in E1 time slot group
(sum of incoming and outgoing calls)
call success Number of successful calls: total number of successful signaling
connection, that is, R2 signaling connection is successfully
completed, and the opposite exchange is available for another call
connection.
Call failure Number of failed calls: total number of failed signaling exchange
during call connecting process, such as peer subscriber line busy,
null called number, and line failure, etc.)
Call-in count Total number of incoming calls
Call-in success Total number of successful incoming calls
Call-in failure Total number of failed incoming calls
Call-in answer Number of sent answers: number of answer signals that the local
exchange sends to the originating point when the call is connected
successfully and the called party picks up the phone.