Command Reference Guide

100 ● display voice entity 3Com Router 5000 Family and Router 6000 Family
Command Reference
display voice entity
Purpose Use the display voice entity command to view the configuration information
of voice entities of different types.
Syntax display voice entity { all | pots | voip |vofr| mark entity-tag }
Parameters all
All voice entities.
pots
All POTS voice entities.
voip
All VoIP voice entities.
vofr
All VoFR voice entities.
mark
Displays a voice entity.
entity-tag
Tag of the voice entity that is to be displayed, ranging
from 1 to 2147483647.
Example Display the configuration information of POTS voice entities.
[3Com ] display voice entity pots
Current configuration of entities
!
entity 66 pots
match-template 6600..
shutdown
compression 1st-level g711alaw
dial-prefix 6600
line 6
!
entity 67 pots
match-template 6600..
shutdown
compression 1st-level g711alaw
dial-prefix 6600
line 7
!
End
View This command can be used in the following views:
■ Any view
Description Usually, you can view the information of all the interfaces that are active in the router
and the global configuration by executing the
display
current-configuration
command. But it will display a great deal of
information. So if you just want to view the configuration information of voice
entities, you can use the
display voice entity command.