Command Reference Guide

90 ● display voice call-history-record 3Com Router 5000 Family and Router 6000 Family
Command Reference
Description If such parameters as callednumber, callingnumber, cardnumber,
remote-ip-addr, last, line are not entered, all the saved call history records should
be output by default. If it is specified that call history records are displayed according
to the number of the latest conversation records (in “last” mode), the default
number of records are 10.
The display format of call history records can be customized by setting the display and
filtering rule. The possible information display formats are as follows:
1. If the parameter brief is specified, the records will be displayed in a brief format.
2. If the parameter brief is not specified, the records will be displayed in a detailed
format.
If it is required to search according to the specified last-number, the records will be
displayed according to the number of records actually retrieved. If no record is found
or the record found is null, the prompting information as follows will appear:
Not found any record.
When setting the display and filtering rule, pay attention to the following points:
■ No unacceptable character is allowed to appear in the calling number or called
number. If any character other than figures and “*”, “#”, “T”, “.” appears in the
entered called-number or calling-number, the enter is invalid.
■ No character other than figures is allowed to appear in the specified number of
the latest conversation records times and voice subscriber-line number. If any
character except figures appears in the entered last-number/line-number, the
enter is invalid.
■ The digits of the specified called number and calling number cannot be over 31. If
the entered called-number or calling-number has over 31 characters, the enter is
invalid.
■ The specified number of the latest conversation records cannot be over 500. If the
specified last-number is greater than 500, the enter is invalid.
■ The specified voice subscriber-line number cannot be greater than the number of
available subscriber lines. If the specified line-number is greater than the number
of available subscriber lines, the enter is invalid.
■ When a call fails, the calling information will be recorded and the calling attributes
that cannot be decided before a call failure will be replaced by a default value.
The RADIUS Server may respond for the following reasons:
■ Normal release
■ Card number not exist
■ Invalid password
■ This accounts is using
■ No enough balance
■ The accounts is expired
■ Credit limit
■ User reject
■ Service invalid
■ Called limit