Command Reference Guide

84 ● display fr vofr-info 3Com Router 5000 Family and Router 6000 Family
Command Reference
display fr vofr-info
Purpose Use the display fr vofr-info command to view the VoFR information.
Syntax display fr vofr-info [ serial interface-number [ dlci-number ] ]
Parameters serial interface-number
Interface needs to be displayed.
dlci-number
Number of the DLCI that needs to be displayed, in the
range 16 to 1007.
Example Specify the interface and DLCI on which the Frame Relay VoFR information will be
displayed.
[Router] display fr vofr-info
INTERFACE(DLCI) VOFR-MODE CID CID-TYPE
Serial1/0/0(200) VOFR-3COM 4 DATA
Serial1/0/0(200) VOFR-3COM 5 FRAG-DAT
View This command can be used in the following views:
■ Any view
Description Use the display fr vofr-info command to view the VoFR information.
This command is used to display the use of FRF.11 sub-channels on a VoFR DLCI. It
supports three displaying types:
■ Neither interface nor DLCI is specified
■ Specifies interface, but not DLCI
■ Specifies both interface and DLCI
Table 1 Description on the fields of the display fr vofr-info command
Field Description
INTERFACE Interface unit
DLCI PVC identifier
VOFR-MODE Type of VoFR
CID Calling ID
CID_TYPE Type of calling ID