Command Reference Guide

78 ● description (in Voice Subscriber-Line View) 3Com Router 5000 Family and Router 6000 Family
Command Reference
description (in Voice Subscriber-Line View)
Purpose Use the description command to configure a subscriber-line description character
string.
Use the
undo description command to cancel the subscriber-line description of
character string.
Syntax description string
undo description
Parameters string
Subscriber-line description character string, and its
value range is 1 to 64 characters.
Example Identify subscriber line 1/0/0 as connected to lab_1.
[Router-voice-line1/0/0] description lab_1
View This command can be used in the following views:
■ FXO Voice Subscriber-Line view
Description This command is applicable to FXO, FXS, E1V1 interfaces.
With the description command, make a description of the voice subscriber-line
connection. This operation will not have any influence on the running of voice
entities, only when the
display command is being executed will the configuration
information be seen.