Command Reference Guide

74 ● delay 3Com Router 5000 Family and Router 6000 Family
Command Reference
Example Set the longest delay-waiting duration to 3000 milliseconds on voice subscriber line
1/0/1:3.
[Router-voice-line1/0/1:3] delay hold 3000
View This command can be used in the following views:
■ Digital E&M Voice Subscriber-Line view
Description On the digital E&M subscriber-line, the waiting duration of originating the next call
set by the
delay call-interval milliseconds command is applicable to the
immediate, wink and delay start.
When the digital E&M subscriber-line uses the delay start mode, the calling party will
use the
delay hold milliseconds command to set the longest time waiting for
the delay signals .
When the digital E&M subscriber-line uses the delay start mode, use the delay
rising
milliseconds command to set the time waiting for the delay signals of
called party after the calling party sends out the off-hook signals, and then detect the
device state of the called party.
When the digital E&M subscriber-line uses the immediate start mode, use the delay
send-dtmf milliseconds
command to set the delay time before the calling
party sends the called number.
The delay dtmf milliseconds command is used to set the duration that the
DTMF signals are being sent, and the
delay dtmf-interval milliseconds
command is used to set the interval for sending the DTMF signals.
When the digital E&M subscriber-line uses the wink start mode, the delay
wink-rising milliseconds
command is used to set the longest time it takes
for the calling party to wait for the wink signals after it sends the seizure signals.
When the digital E&M subscriber-line uses the wink start mode, the delay
wink-hold
milliseconds command is used to set the longest duration that the
wink signals sent by the called party.
When the digital E&M subscriber-line uses the wink start mode, the delay
send-wink
milliseconds command is used to set the longest time that the
called party delays before sending the wink signals.
Related Commands ■ timeslot-set
■ timer