Command Reference Guide

68 ● default entity fax 3Com Router 5000 Family and Router 6000 Family
Command Reference
default entity fax
Purpose Use the default entity fax command to set the default fax parameter settings
globally.
Use the
undo default entity fax command to restore the system-default
default settings.
Syntax default entity fax baudrate { 2400 | 4800 | 9600 | 14400 | disable |
voice }
default entity fax ecm
default entity fax level level
default entity fax local-train threshold value
default entity fax nsf-on
default entity fax protocol standard-t38 [ hb-redundancy number |
lb-redundancy number ]
default entity fax protocol nonstandard
default entity fax protocol pcm { g711alaw | g711ulaw }
default entity fax protocol t38 [ hb-redundancy number | lb-redundancy
number ]
default entity fax support-mode { rtp | sip-udp | vt }
default entity fax train-mode { local | ppp }
undo default entity fax { baudrate | ecm | level | local-train threshold
| nsf-on | protocol | support-mode | train-mode }
Parameters baudrate
Specifies the maximum transmission speed of the fax.
It defaults to voice.
■ 2400
Sets the maximum transmission speed to 2400 bps.
■ 4800
Sets the maximum transmission speed to 4800 bps.
■ 9600
Sets the maximum transmission speed to 9600 bps.
■ 14400
Sets the maximum transmission speed to 14400 bps.
■ disable
Disables the fax forwarding faculty.
■ voice