Command Reference Guide

58 ● debugging voice vcc 3Com Router 5000 Family and Router 6000 Family
Command Reference
debugging voice vcc
Purpose Use the debugging voice vcc command to enable the debugging at various
levels of the VCC module.
This command is used to enable the debugging of the VCC module, and to specify
the levels and types of the debugging.
Syntax debugging voice vcc { all | error | ipp | proc | rcv | timer | vpp |
line line-number }
Parameters all
Enable all debugging of the VCC module.
error
Enable the error debugging of the VCC module.
ipp
Enable the debugging of the messages between the
IPP module and the VCC module.
proc
Enable the debugging of the messages between the
system process and the VCC module.
radius
Enable the debugging of the messages between the
RADIUS Client and the VCC module.
rcv
Enable the debugging of the messages between the
RCV module and the VCC module.
timer
Enable the debugging information of the messages
between the timer module and the VCC module.
vpp
Enable the debugging information of the messages
between the VPP module and the VCC module.
line
Enable the debugging of the specified subscriber line
on the router.
line-number
Subscriber line number, the value range of it is decided
by the type and quantity of the voice cards actually put
into operation.
Example Debug the messages sent to the VPP module from the VCC module.
<Router> debugging voice vcc radius
View This command can be used in the following views:
■ User view
Description When specifying the levels and types of the debugging, pay attention to the
following points: