Command Reference Guide

56 ● debugging voice vas 3Com Router 5000 Family and Router 6000 Family
Command Reference
debugging voice vas
Purpose Use the debugging voice vas command to enable the VAS module debugging.
Use the
undo debugging voice vas command to disable the debugging.
Syntax debugging voice vas { all | buffer | cid | command | dsp | em | error |
fax | line | rcv | receive | send }
Parameters all
Enable all the debugging of the VAS module.
buffer
Enable the debugging of the buffer area for the VAS
module to transmit commands to the DSP module.
cid
Enable VAS CID debugging
command
Enable the debugging between the VAS module and
the command buffer area.
dsp
Enable the debugging between the VAS module and
the underlying DSP module.
em
Enable the debugging of the EM subscriber-line
operation of the VAS module.
error
Enable the debugging of the connection failure caused
by the VAS module.
fax
Enable VAS fax debugging.
line
Enable the debugging for the VAS module to log on to
a specified line.
rcv
Enable the debugging between VAS and RCV.
receive
Enable the debugging for the VAS module to receive
data.
send
Enable the debugging for the VAS module to transmit
data.
Example Enable all the debugging of the VAS module.
<3Com > debugging voice vas all
View This command can be used in the following views:
■ User view