Command Reference Guide

3Com Router 5000 Family and Router 6000 Family debugging voice rcv ● 53
Command Reference
debugging voice rcv
Purpose Use the debugging voice rcv command to enable the debugging of the RCV
module.
Use the
undo debugging voice rcv command to disable the debugging.
Syntax debugging voice rcv { all | cc | error | r2 | timer | vas | vcc | vpp }
Parameters all
Enable all the debugging of the RCV module.
cc
Enable the debugging between the RCV module and
the underlying CC module.
error
Enable the debugging of RCV-caused connection
failures.
r2
Display information between the RCV module and the
R2 module.
timer
Enable the debugging for the timer operation of the
RCV module.
vas
Enable the debugging between the RCV module and
the underlying VAS module.
vcc
Enable the debugging between RCV and the
underlying VCC module.
vpp
Enable the debugging between the RCV module and
the underlying VPP module.
Example Enable all the debugging of the RCV module.
<3Com > debugging voice rcv all
View This command can be used in the following views:
■ User view