Command Reference Guide

3Com Router 5000 Family and Router 6000 Family debugging voice fax ● 47
Command Reference
debugging voice fax
Purpose Use the debugging voice fax command to enable fax debugging.
Syntax debugging voice fax { all | api | cc | channel [ channel-no ] |
nonstandard-compatible | controller | error-all | ipp | t38 }
Parameters all
Enables all fax debugging.
api
Enables API function debugging of fax.
cc
Enables main task debugging of fax.
channel [ channelno ]
Enables debugging of the specified channel.
nonstandard-compatible
Enables debugging of the nonstandard-compatible fax
protocol.
controller
Enables fax controller debugging.
error-all
Enables fax error debugging at all levels.
ipp
Enables debugging of the messages between the fax
and IPP modules.
t38
Enables Fax T38 debugging.
Example Enables main task debugging of fax.
<Router> debugging voice fax cc
View This command can be used in the following views:
■ User view
Description The debugging voice fax channel channel-number command is
independent of the
debugging voice fax all command. The debugging
voice fax channel channel-number
command enables debugging for only
the specified channel; it does not enable debugging for the specific items. To view the
debugging information of a specific item, you must enable debugging for it with the
corresponding command. The
debugging voice fax all command enables
debugging for all items except for channel.
The undo debugging voice fax all command are not completely
independent of the
undo debugging voice fax channel command. The
undo debugging voice fax all command also disables debugging for
channel, while the
undo debugging voice fax channel command disables
debugging only for channel.