Command Reference Guide

3Com Router 5000 Family and Router 6000 Family jitter-interval ● 225
Command Reference
jitter-interval
Purpose Use the jitter-interval command to set a packet sending interval for a jitter
test.
Use the undo jitter-interval command to restore the default.
Syntax jitter-interval interval
undo jitter-interval
Parameters interval
Packet sending interval in a jitter test (in milliseconds).
The range of acceptable values depends on different
test types. For Jitter test, valid values are 10 to 1000
milliseconds, defaulting to 50 milliseconds; for a voice
test, valid values are 10 to 60,000 milliseconds,
defaulting to 20 milliseconds..
Example Send packets at intervals of 30 milliseconds in a jitter test.
[Router-administrator-icmp] jitter-interval 30
View This command can be used in the following views:
■ HWPing Test Group view
Description This command applies only to jitter test.
Related Command jitter-packetnum