Command Reference Guide

3Com Router 5000 Family and Router 6000 Family cid send ● 33
Command Reference
cid send
Purpose Use the cid send command to enable the FXO or FXS module to send calling
numbers to the IP side.
Use the undo cid send command to disable the FXO or FXS module to send
calling numbers to the IP side.
Syntax cid send
undo cid send
Parameters None
Default By default, calling numbers are sent to the IP side.
Example Enable the FXO voice subscriber-line 3/0/0 to send calling numbers to the IP side.
[Router-voice-line3/0/0] cid send
Disable the FXS voice subscriber-line 1/0/0 to send calling numbers to the IP side.
[Router-voice-line1/0/0] undo cid send
View This command can be used in the following views:
■ Voice Subscriber-Line view
Description This command applies to FXS and FXO subscriber-lines only.
After you configure the undo cid send command, the FXO interface does not
send any number to the called side, regardless of whether the calling party has sent a
calling number and regardless of whether a number is configured in the match
template for the voice entity associated with the FXO interface.