Command Reference Guide

30 ● cid display 3Com Router 5000 Family and Router 6000 Family
Command Reference
cid display
Purpose Use the cid display command to enable caller identification display.
Use the undo cid display command to disable caller identification display.
Syntax cid display
undo cid display
Parameters None
Default By default, caller identification display is enabled.
Example Enable caller identification display on voice subscriber-line 1/0/0.
[Router-voice-line1/0/0] cid display
View This command can be used in the following views:
■ Voice Subscriber-Line view
Description This command is applicable to FXS subscriber-lines.
When functioning as the called, the FXS module can send caller identification
information to its called phone between the first and second rings. When disabled to
send caller identification information, the FXS interface sends the character “P”
received from the IP side instead. Thus, the called phone is unable to display caller
identification information.