Command Reference Guide

28 ● cdr 3Com Router 5000 Family and Router 6000 Family
Command Reference
cdr
Purpose Use the cdr command to configure the saving rule for call detail record.
Use the undo cdr command to restore the default saving rule.
Syntax cdr { buffer [ size-number ] | duration [ timer-number ] | threshold {
threshold | default } }
undo cdr
Parameters buffer
Save the call records by setting the upper limit of the
number of records.
size-number
Number of the saved call detail records. Valid values
are 0 to 500, with the value 0 indicating that no call
detail record is saved. In max-size mode, the default
value of
size-number is 50.
duration
Save the call records by setting the maximum retaining
time of records (start from the moment when a
conversation ends).
timer-number
Retaining time of call detail records (in minutes). Valid
values are 0 to 2147483647, with the value 0
indicating that no call detail record is saved. In
max-size mode, the default value of
timer-number
is 15.
threshold threshold
Threshold for call history output. Valid values are 0 to
100.
If no value is specified, the default is 80.
default
Default threshold for call history output.
Example Specify that at most 400 call detail records can be saved.
[Router-voice-aaa] cdr buffer 400
Specify that the detail records of the conversation ending within 10 minutes should
be saved.
[Router-voice-aaa]cdr duration 10
View This command can be used in the following views:
■ Voice AAA view