Command Reference Guide

22 ● callednumber receive-method 3Com Router 5000 Family and Router 6000 Family
Command Reference
callednumber receive-method
Purpose Use the callednumber receive-method command to enable the device to
place a call immediately after all digits of the called number are collected or after a
pound sign (#), the terminator, is received.
Use the undo callednumber receive-method command to restore the
default.
Syntax callednumber receive-method { immediate | terminator }
undo callednumber receive-method
Parameters immediate
Places a call immediately after all digits of the called
number are collected.
terminator
Places a call only after a pound sign (#), the terminator,
is received.
Default By default, the terminator keyword applies.
Example Set the called number receive-method to immediate for access number 17990.
[Router-voice-dial-anum17990] callednumber receive-method immediate
View This command can be used in the following views:
■ Voice Access-Number view
Description Normally, in a two-stage dial procedure, the user needs to input a pound sign (#) to
indicate the end of a called number. To free the user from the trouble of inputting the
terminator, you may configure the
callednumber receive-method
immediate
command allowing the router to place a call immediately after all digits
of the called number are collected.