Command Reference Guide

20 ● authorization-level 3Com Router 5000 Family and Router 6000 Family
Command Reference
authorization-level
Purpose Use the authorization-level command to configure a local caller
authorization level for the voice entity.
Use the undo authorization-level command to restore the default local
caller authorization level of the voice entity.
Syntax authorization-level level
undo authorization-level
Parameters level
Local caller authorization level. Valid values are 0 to 9.
The greater the value, the higher the level.
If no value is specified, the default level is 0.
Example Set the local caller authorization level to 2 for voice entity 10.
[Router-voice-dial-entity10] authorization-level 2
View This command can be used in the following views:
■ Voice Entity view
Description For a voice entity, 10 local caller authorization levels are available, with a greater value
indicating a higher level. A voice entity can be used for setting up a call only when the
user level carried in the call is greater than the local caller authorization level of the
voice entity. If the local caller authorization level of the voice entity is 0, it can be used
to set up calls for any user.