Command Reference Guide

16 ● area-id (Voice Entity view) 3Com Router 5000 Family and Router 6000 Family
Command Reference
area-id (Voice Entity view)
Purpose Use the area-id command to configure the area ID of voice GW.
Use the undo area-id command to cancel the specified area ID.
Syntax area-id string
undo area-id
Parameters string
Area ID. Valid values are 0 to 9. The “#” can also be
used.
Default By default, no area ID of voice GW is configured.
Example Configure the VoIP voice entity 101 with the area ID 6#.
[Router-voice-dial-entity101] area-id 6#
View This command can be used in the following views:
■ Voice Entity view
Description The voice area ID is set in VoIP voice entity view and will be automatically added to the
beginning of called numbers when establishing calls.
Related Commands ■ match-template
■ entity