Command Reference Guide

222 ● ip option source-routing 3Com Router 5000 Family and Router 6000 Family
Command Reference
ip option source-routing
Purpose Use the ip option source-routing command to enable IP source routing,
allowing the router to handle the packets with the IP source-route option.
Use the undo ip option source-routing command to disable IP source
routing.
Syntax ip option source-routing
undo ip option source-routing
Parameters None
Default By default, IP source routing is disabled to decrease the risk of attacks. You may
enable and use it in conjunction with the ping or tracert command executed on
other devices when troubleshooting network path faults or transmitting some special
service.
Example Enable IP source routing.
[3Com] ip option source-routing
Disable IP source routing.
[3Com] undo ip option source-routing
View This command can be used in the following views:
■ System view