Command Reference Guide

3Com Router 5000 Family and Router 6000 Family address sip ● 11
Command Reference
address sip
Purpose Use the address sip command to set routing policy for reaching the remote voice
gateway (VG) to SIP.
Use the undo address command to restore the default.
Syntax address sip { proxy | { ip ip-address port port-number } }
undo address sip proxy | ip
Parameters proxy
Adopts SIP proxy server to complete SIP interaction.
ip-address
IPv4 address to which SIP packets of a call is destined.
port port-number
Port number. Valid values are 1 to 65535.
Default By default, no routing policy is configured for reaching the remote VG.
Example Configure the current voice entity to complete SIP interaction through a SIP proxy
server.
[Router-voice-dial-entity1] address sip proxy
View This command can be used in the following views:
■ Voice Entity view
Description If address sip ip ip-address port port-number is configured, SIP packets
in a call are routed directly to the address specified in the command.
If address sip proxy is configured, the SIP interaction process involves a SIP
proxy server.
Configure the command appropriate to the call routing policy applies to the network.
After configuring this command, the area-id command and the fast-connect
command, if configured, do not take effect any more.
Related Command address