Command Reference Guide

3Com Router 5000 Family and Router 6000 Family ip netstream timeout inactive ● 221
Command Reference
ip netstream timeout inactive
Purpose Use the ip netstream timeout inactive command to set the inactive aging
timer for NetStream cache entries.
Use the undo ip netstream timeout inactive command to restore the
default.
Syntax ip netstream timeout inactive seconds
undo ip netstream timeout inactive
Parameters seconds
Sets the length of the inactive aging timer for
NetStream cache entries (in seconds). Valid values are
10 to 600 seconds.
If no value is specified, the default is 30 seconds.
Example Set the inactive aging timer to 60 seconds.
[R6000] ip netstream timeout inactive 60
View This command can be used in the following views:
■ System view
Description In the inactive aging approach, a NetStream cache entry ages out if the time elapsed
since the last packet was present for this entry exceeds the time specified by the
inactive timeout command.
Related Command ip netstream timeout active