Command Reference Guide

220 ● ip netstream timeout active 3Com Router 5000 Family and Router 6000 Family
Command Reference
ip netstream timeout active
Purpose Use the ip netstream timeout active command to set the active aging timer
for NetStream cache entries.
Use the undo ip netstream timeout active command to restore the
default.
Syntax ip netstream timeout active minutes
undo ip netstream timeout active
Parameters minutes
Sets the length of the active aging timer for NetStream
cache entries (in minutes). Valid values are 1 to 60.
Default By default, the active aging timer is set to 30 minutes.
Example Set the active aging timer to 60 minutes.
[R6000] ip netstream timeout active 60
View This command can be used in the following views:
■ System view
Description In the active aging approach, a NetStream cache entry ages out if the time elapsed
since the first packet was present for this entry exceeds the time specified by the
active timeout command.
Related Command ip netstream timeout inactive