Command Reference Guide

3Com Router 5000 Family and Router 6000 Family script trigger init ● 45
Command Reference
script trigger init
Purpose Use the script trigger init command to configure the Modem script that will
be executed when the system is powered on or rebooted.
Use the undo script trigger init command to cancel this feature.
Syntax script trigger init script-name
undo script trigger init
Parameters script-name
Name of Modem script.
Default By default, the system does not specify the script.
Example Set the system to execute “example” when the system is powered on or rebooted.
[3Com -ui-tty1] script trigger init example
View This command can be used in the following views:
■ User Interface view
Description If this command is configured, the specified Modem script will be executed for
initializing the asynchronous device connected to the interface when the system is
powered on or rebooted.
Related Commands ■ script-string
■ start-chat
■ script trigger login
■ script trigger connect
■ script trigger dial
■ script trigger logout