Command Reference Guide

3Com Router 5000 Family and Router 6000 Family modem ● 35
Command Reference
modem
Purpose Use the modem command to enable modem call-in and call-out on the interface.
Use the undo modem and undo modem both command to disable modem call-in
and call-out.
Use the undo modem [ call-in | call-out ] command to disable modem call-in or
call-out.
Syntax modem [ both | call-in | call-out ]
undo modem [ both | call-in | call-out ]
Parameters both
Permits both modem call-in and modem call-out.
out
Permits only modem call-in.
call-out
Permits only modem call-out.
Default By default, both modem call-in and call-out are disabled on the interface.
Example Enable receiving incoming Modem calls on interface u-tty1..
[3Com -ui-tty1] modem call-in
View This command can be used in the following views:
■ User Interface view
Description This command can be used to set the authority of Modem dial-in and dial-out on an
interface.