Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display dialer ● 31
Command Reference
display dialer
Purpose Use the display dialer command to view information on DCC interfaces.
Syntax display dialer [ interface interface-type interface-number ]
Parameters interface-type
Interface type.
interface-number
Interface number.
Default By default, information on all DCC interfaces is displayed.
Example Display information on dialer interfaces.
[3Com ] display dialer
Dialer0 - dialer type = Dialer
Dialer Route:
NextHop_address Dialer_Numbers
Dialer number 003
Dialer Timers(Secs):
Auto-dial:300 Compete:20 Enable:5
Idle:120 Wait-for-Carrier:60
Total Channels:30 Free Channels:29
View This command can be used in the following views:
■ Any view
Related Commands ■ dialer timer idle
■ dialer timer compete
■ dialer timer wait-for-carrier
Table 1 Description on the fields of the display dialer command
Field Description
NextHop address Remote address associated with a dialer route on the interface
Dialer Number Dial string corresponding to the dialer route
Dialer Timers(Secs) Setting of the dialer timer
Auto-dial Time set by the dialer timer autodial command
Compete Time set by the dialer timer compete command
Enable Time set by the dialer timer enable command
Idle Time set by the dialer timer idle command
Wait for carrier Time set by the dialer timer wait-carrier command
Total Channels Total number of channels
Free Channels Number of free channels