Command Reference Guide

30 ● dialer user 3Com Router 5000 Family and Router 6000 Family
Command Reference
dialer user
Purpose Use the dialer user command to configure remote user name for authenticating
requests when calls are received.
Use the undo dialer user command to cancel the remote user name.
Syntax dialer user username
undo dialer user
Parameters username
Remote user name for PPP authentication, consisting
of a string of 1 to 80 characters.
Default By default, no remote user name is set.
Example Set the remote username to “RouterB”.
[3Com -Dialer3] dialer user RouterB
View This command can be used in the following views:
■ Dialer Interface view
Description This command is only valid on dialer interfaces of Resource-Shared DCC.
Up to 255 Dialer users can be set on one Dialer interface. When one Dialer interface is
configured with multiple users, multiple physical interfaces can access this Dialer
interface.
When a Dialer interface encapsulates PPP, the remote user that have passed PPP
authentication decides the Dialer interface that receives calls. In this case, you the
option to configure
dialer number command.
Related Commands ■ ppp pap local-user
■ ppp chap user