Command Reference Guide

3Com Router 5000 Family and Router 6000 Family dialer timer warmup ● 29
Command Reference
dialer timer warmup
Purpose Use the dialer timer warmup command to set the length of the warmup timer
on the router configured with the dial-up backup function. It is the time that the
router must wait for bringing the dial-up backup function into effect after a reboot.
Use the dialer timer warmup command to restore the default.
Syntax dialer timer warmup seconds
undo dialer timer warmup
Parameters seconds
Length of the warmup timer (in seconds).
If not specified, the default is 30 seconds.
Example Set the warmup timer to 20 seconds.
[Router] dialer timer warmup 20
View This command can be used in the following views:
■ System view
Description When the router reboots, it tries to dial the backup link only if the main link fails to
come up upon timeout of the warm-up timer. After the main link comes up, the
router switches traffic to it automatically.