Command Reference Guide

218 ● ip netstream format no-direction 3Com Router 5000 Family and Router 6000 Family
Command Reference
ip netstream format no-direction
Purpose Use the ip netstream format no-direction command to remove flow
direction mark in the header of NetStream log packet.
Use the undo ip netstream format no-direction command to configure
to mark flow direction in the header of NetStream log packet.
Syntax ip netstream format no-direction
undo ip netstream format no-direction
Parameters None
Default By default, the header in the NetStream log packet marks the flow direction.
Example Remove flow direction mark in the header of NetStream log packet.
[3Com] ip netstream format no-direction
View This command can be used in the following views:
■ System view
Description The first byte in the header of NetStream log packet is used to mark the flow
direction, and the second is used to mark the version number. However, in Cisco’s log
packet, the first two bytes are used together to mark the version number only. You
can use this command remove the flow direction mark in order to keep compatible
with Cisco.