Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 5000 Router Series
2601260226032604260526062607260826092610
3Com Router 5000 Family and Router 6000 Family dialer route ● 19
Command Reference
Default By default, no dialer route is defined.
Example Dial 888066 to set up link for the packets destined to network segment
192.168.1.0/24.
[3Com ] dialer route ip 192.168.1.0 mask 24 888066
Dial 888066 to set up link for the packets destined to host address 192.168.1.1 (not
recommended).
[3Com ] dialer route ip 192.168.1.1 888066
View This command can be used in the following views:
■ Physical or Dialer Interface view
Description To originate a call, the parameter dial-number must be configured. If the user
keyword is used, PPP authentication must be configured.
The user can configure multiple dialer routes for a dial port or a destination address.
If the dialer-group command is not configured, DCC will not dial.
Related Commands ■ dialer enable-circular
■ dialer autodial-interval