Command Reference Guide

3Com Router 5000 Family and Router 6000 Family dialer queue-length ● 17
Command Reference
dialer queue-length
Purpose Use the dialer queue-length command to configure the number of packets
which comply with the "permit" statement that can be buffered before a link is set
up.
Use the
undo dialer queue-length command to restore the default number of
the packets that can be buffered.
Syntax dialer queue-length packets
undo dialer queue-length
Parameters packets
Indicates the packet numbers buffered on this
interface. Valid values are 1 to 100.
If no value is specified, the default value for
max-threshold is 0.
Example Configure that 10 packets are buffered on Serial1/0/0.
[3Com -Serial1/0/0] dialer queue-length 10
View This command can be used in the following views:
■ Physical or Dialer Interface view
Description In the link establishing process, the packets which comply with the "permit"
statement are held in the buffer queue to wait for transmission as soon as the link is
set up. The setting of
packets decides the queue length.