Command Reference Guide

16 ● dialer priority 3Com Router 5000 Family and Router 6000 Family
Command Reference
dialer priority
Purpose Use the dialer priority command to configure a priority for a physical interface
in a dialer circular group in the Circular DCC configuration.
Use the
undo dialer priority command to restore the default priority.
Syntax dialer priority priority
undo dialer priority
Parameters priority
Indicates the priority level for a physical interface
which belongs to a dialer circular group, ranging from
1 to 127. By default, the priority is 1.
Example Set the priority of Serial 3/0/0 in dialer circular group0 to 5.
[3Com -Serial3/0/0] dialer circular-group 0
[3Com -Serial3/0/0] dialer priority 5
View This command can be used in the following views:
■ Physical Interface view
Description This command sets the order in which the available physical interfaces in a dialer
circular group are used. The physical interfaces with higher priority will be used first.
Related Command dialer circular-group