Command Reference Guide

3Com Router 5000 Family and Router 6000 Family ip netstream export version ● 217
Command Reference
ip netstream export version
Purpose Use the ip netstream export version command to configure the type of AS
numbers to be recorded in NetStream cache entries and the version of UDP packets.
Use the undo ip netstream export version command to restore the
defaults.
Syntax ip netstream export version version-number [ origin-as | peer-as ]
undo ip netstream export version
Parameters version-number
UDP packet version number. At present, it can be 5
only.
origin-as
Sets the type of AS number recorded in NetStream
cache entries to origin.
peer-as
Sets the type of AS number recorded in NetStream
cache entries to peer.
Default By default, the version number is 5 and the AS option is peer-as.
Example Set the NetStream UDP packet version number to 5 and the AS option to origin-as.
[R6000] ip netstream export version 5 origin-as
View This command can be used in the following views:
■ System view
Description In the FIB, each IP address, source or destination, has two AS numbers, origin and
peer. The NetStream however, records only one of them. For example, when the
default AS option setting, peer-as applies, NetStream records only the peer AS
numbers with the source and destination IP addresses for each entry. These peer AS
numbers are to be used for AS aggregation if it is enabled.