Command Reference Guide

3Com Router 5000 Family and Router 6000 Family dialer isdn-leased ● 13
Command Reference
dialer isdn-leased
Purpose Use the dialer isdn-leased command to configure an ISDN B channel (can be
either the channel on a BRI or PRI interface) to be the leased line.
Use the undo dialer isdn-leased command to cancel the setting.
Syntax dialer isdn-leased number
undo dialer isdn-leased number
Parameters number
Number of the ISDN B channel for leased line
connection. Valid values are 0 or 1 if the channel is on
a BRI interface, 0 to 30 on a PRI interface, and 0 to 23
on a CT1/PRI interface.
Default By default, no ISDN B channel is configured to be leased line.
Example Configure the first B channel on the interface Bri0/0/0 to be the leased line.
[3Com -Bri0/0/0] dialer isdn-leased 1
View This command can be used in the following views:
■ Physical or Dialer Interface view
Description The user can configure any ISDN B channel to be the leased line without affecting the
settings of other B channels.
On an ISDN BRI interface, you may configure ISDN BRI 128k leased line in addition.
For more information, refer to the dialer isdn-leased command in the chapter
“ISDN Configuration Commands” in the part “Link Layer Protocol” of this manual.
Related Command dialer isdn-leased