Command Reference Guide

10 ● dialer disconnect 3Com Router 5000 Family and Router 6000 Family
Command Reference
dialer disconnect
Purpose Use the dialer disconnect command to clear the dial-up link or the session link
on the specified interface at the PPPoE/PPPoA client.
Syntax dialer disconnect interface [ interface-type interface-number ]
Parameters interface-type
Specifies an interface together with
interface-number.
interface-number
Specifies an interface together with
interface-type.
Example Clear the dial-up link or the session link on the specified interface at the PPPoE client.
[Router] dialer disconnect interface dialer0
Clear the specified D channel.
[Router] dialer disconnect interface Serial1/0/0:15
Clear the specified B channel.
[Router] dialer disconnect interface Serial1/0/0:2
View This command can be used in the following views:
■ Any view
Description The type of the specified interface can be dialer, D channel (on a PRI or BRI interface
for example), or B channel (on an RI, BRI, AUX, Serial, or AM interface for example).
Related Command debugging dialer