Command Reference Guide

3Com Router 5000 Family and Router 6000 Family dialer circular-group ● 9
Command Reference
dialer circular-group
Purpose Use the dialer circular-group command to add the physical interface to a
dialer circular group specified here.
Use the
undo dialer circular-group command to cancel the configuration.
Syntax dialer circular-group number
undo dialer circular-group
Parameters number
Number of the dialer circular group, and a physical
interface belongs to this specified group. Valid values
are 0 to 1023. This number is defined through the
interface dialer command.
Default By default, the physical interface is not a member of any dialer circular group.
Example Assign Serial1/0/0 and Serial2/0/0 to dialer circular group1.
[3Com -Serial1/0/0] dialer circular-group 1
[3Com -Serial2/0/0] dialer circular-group 1
View This command can be used in the following views:
■ Physical Interface view
Description One physical interface can only be added to one dialer circular group, which may
contain multiple physical interfaces. When a call is originated on a dialer interface, the
highest priority physical interfaces in the circular group on the dialer interface will
place the call.
Related Command interface dialer