Command Reference Guide

216 ● ip netstream export source 3Com Router 5000 Family and Router 6000 Family
Command Reference
ip netstream export source
Purpose Use the ip netstream export source command to configure a source
interface for NetStream UDP packets.
Use the undo ip netstream export source command to restore the default.
Syntax ip netstream export source interface interface-type interface-number
undo ip netstream export source
Parameters interface-type
interface-number
Specifies a source interface for NetStream UDP
packets.
Default By default, the source interface is 0, meaning no source interface is specified for
NetStream UDP packets.
Example Configure the source interface for NetStream UDP packet as Ethernet 3/0/0.
[R6000] ip netstream export source interface ethernet 3/0/0
View This command can be used in the following views:
■ System view,
■ NetStream Aggregation view
Related Commands ■ ip netstream aggregation
■ ip netstream export host