Command Reference Guide

3Com Router 5000 Family and Router 6000 Family dialer bundle ● 5
Command Reference
dialer bundle
Purpose Use the dialer bundle command to configure a dialer bundle used by a dialer
interface.
Use the undo dialer bundle command to disassociate the dialer bundle from
the dialer interface.
Syntax dialer bundle number
undo dialer bundle
Parameters number
Number of dialer bundle. Valid values are 1 to 255.
Default By default, the Resource-Shared DCC is not enabled, neither is dialer bundle
specified.
Example Configure the interface Dialer1 to use dialer bundle3, in which the interface Serial0 is
included.
[3Com -Dialer1] dialer bundle 3
[3Com -Serial0/0/0] dialer bundle-member 3purpose_body
View This command can be used in the following views:
■ Dialer Interface view
Description This command can be applied only on a dialer interface for configuring the dialer
bundle that the interface will use. Furthermore, a dialer interface can only use a dialer
bundle. This command can be used to specify a dialer bundle used by a dialer
interface, no matter what link-protocol, PPP or Frame Relay, runs on the interface.
Related Command dialer bundle-member