Command Reference Guide

3Com Router 5000 Family and Router 6000 Family ip netstream export host ● 215
Command Reference
ip netstream export host
Purpose Use the ip netstream export host command to set the destination IP address
and UDP port number for NetStream UDP packets.
Use the undo ip netstream export host command to restore the defaults.
Syntax ip netstream export host ip-address udp-port
undo ip netstream export host
Parameters ip-address
Destination IP address for NetStream UDP packets, in
dotted decimal notation.
udp-port
UDP port number for NetStream UDP packets.
Example Configure the destination IP address and UDP port number for NetStream UDP packet
as 172.16.105.48 and 50000 respectively.
[R6000] ip netstream export host 172.16.105.48 50000
View This command can be used in the following views:
■ System view,
■ NetStream Aggregation view
Description In system view, the source interface is 0, destination address and destination UDP port
number are both 0, UDP packet version is 5, and the peer AS numbers are recorded in
NetStream cache entries by default.
In aggregation view, the default source interface, and destination address and
destination UDP port number are those configured in system view.
Related Commands ■ ip netstream aggregation
■ ip netstream export source