Command Reference Guide

214 ● ip netstream aggregation 3Com Router 5000 Family and Router 6000 Family

Command Reference

ip netstream aggregation

Purpose Use the ip netstream aggregation command to enter NetStream aggregation

view.

Syntax ip netstream aggregation { as | protocol-port | source-prefix |

destination-prefix | prefix }

Parameters as

AS aggregation by combination of source AS number,

destination AS number, inbound interface index, and

outbound interface index.

protocol-port

Protocol-port aggregation by combination of protocol

number, source port, and destination port.

source-prefix

Source-prefix aggregation by combination of source

AS number, source address mask length, source prefix,

and inbound interface index.

destination-prefix

Destination-prefix aggregation by destination AS

number, destination address mask length, destination

prefix, and outbound interface index.

prefix

Source and destination prefix aggregation by

combination of source AS number, destination AS

number, source address mask length, destination

address mask length, source prefix, destination prefix,

inbound interface index, and outbound interface

index.

Example Enter NetStream AS aggregation view.

View This command can be used in the following views:

■ System view

Description In NetStream aggregation view, you can enable or disable the aggregation mode, set