Command Reference Guide

3Com Router 5000 Family and Router 6000 Family ip netstream { inbound | outbound } ● 213
Command Reference
ip netstream { inbound | outbound }
Purpose Use the ip netstream { inbound | outbound } command to enable NetStream
statistics in the inbound or outbound direction of the interface.
Use the undo ip netstream { inbound | outbound } command to disable
Netstream statistics in the inbound or outbound direction of the interface.
Syntax ip netstream { inbound | outbound }
undo ip netstream { inbound | outbound }
Parameters inbound
Enables NetStream statistics in the inbound direction
of the interface.
outbound
Enables NetStream statistics in the outbound direction
of the interface.
Default By default, NetStream statistics is disabled in both directions of the interface.
Example Enable NetStream statistics in the inbound direction of interface ATM 1/0/0.
[R6000-Atm1/0/0] ip netstream inbound
View This command can be used in the following views:
■ Interface view