Command Reference Guide

3Com Router 5000 Family and Router 6000 Family traffic classifier ● 139
Command Reference
traffic classifier
Purpose Use the traffic classifier command to define a class and enter the class view.
Use the
undo traffic classifier command to delete a class.
Syntax traffic classifier tcl-name [ operator { and | or } ]
undo traffic classifier tcl-name
Parameters and
Specifies the relation between the rules in the class as
logic AND. That is, the packet that matches all the
rules belongs to this class.
or
Specifies the relation between the rules in the class as
logic OR. That is, the packet that matches any one of
the rules belongs to this class.
tcl-name
Class name.
Default By default, the relation is operator and.
Example Define a class named as class 1.
[3Com ] traffic classifier class1
[3Com -classifier-class1]
View This command can be used in the following views:
■ System view
Description tcl-name shall not be the classes pre-defined by the system. The classes defined by
the system include: default-class, ef, af1, af2, af3, af4, ip-prec0, ip-prec1, ip-prec2,
ip-prec3, ip-prec4, ip-prec5, ip-prec6, ip-prec7, mpls-exp0, mpls-exp1, mpls-exp2,
mpls-exp3, mpls-exp4, mpls-exp5, mpls-exp6, and mpls-exp7.
Related Commands ■ qos policy
■ traffic behavior
■ classifier behavior