Command Reference Guide

3Com Router 5000 Family and Router 6000 Family remark dot1p ● 129
Command Reference
remark dot1p
Purpose Use the remark dot1p command to configure the 802.1p priority value in the
VLAN packets of a class.
Use the
undo remark dot1p command to remove the 802.1p priority value from
the VLAN packets.
Syntax remark dot1p cos-value
undo remark dot1p
Parameters cos-value
802.1p priority value of VLAN packets, ranging from 0
to 7.
Default By default, VLAN packets have no 802.1p priority value.
Example Set the 802.1p priority value in the VLAN packets of a class to 6.
[3Com ] traffic behavior database
[3Com -behavior-database] remark dot1p 6
View This command can be used in the following views:
■ Traffic Behavior view
Description 802.1p priority value is the CoS domain value in VLAN packets. The level 2 switching
devices, such as Ethernet switch, set up forwarding policy according to this priority
value.