Command Reference Guide

3Com Router 5000 Family and Router 6000 Family remark atmclp ● 127
Command Reference
remark atmclp
Purpose Use the remark atmclp command to have the system remark the CLP bit of ATM
packets in the class.
Use the
undo remark atmclp command to disable remarking the CLP bit of ATM
packets.
Syntax remark atmclp atmclp-value
undo remark atmclp
Parameters atmclp-value
Value of the cell loss priority (CLP) bit in ATM packets,
0 or 1.
Default By default, the CLP bit of ATM packets is not remarked.
Example Remark the CLP bit of ATM packets to 1.
[3Com ] traffic behavior database
[3Com -behavior-database] remark atmclp 1
View This command can be used in the following views:
■ Traffic Behavior view
Description The policy that includes CLP remark can apply only on the outbound direction of
interfaces or ATM PVCs. When congestion occurs, the router drops packets with a
high CLP bit value, if CLP remark is supported.