Command Reference Guide

3Com Router 5000 Family and Router 6000 Family qos pql default-queue ● 105
Command Reference
qos pql default-queue
Purpose Use the qos pql default-queue command to designate the packets without
corresponding rules to a default queue.
Use the
undo qos pql default-queue command to cancel the configuration
and restore the default value.
Syntax qos pql pql-index default-queue { top | middle | normal | bottom }
undo qos pql pql-index default-queue
Parameters pql-index
PQL index, ranging 1 to 16.
top, middle, normal and
bottom
Corresponding to the four levels of priority queue, in
descending order. The queue defaults to normal.
Example Set the default queue of the packets matching no rules in PQL 12 to be the bottom
queue.
[3Com ] qos pql 12 default-queue bottom
View This command can be used in the following views:
■ System view
Description During traffic classification, if a packet does not match any rule, it will be put into the
default priority queue.
For the same pql-index, repeated use of this command will set new default queue.
Related Command display qos pql