Command Reference Guide

3Com Router 5000 Family and Router 6000 Family qos policy ● 101
Command Reference
qos policy
Purpose Use the qos policy command to define a policy and enter policy view.
Use the
undo qos policy command to delete a policy.
Syntax qos policy policy-name
undo qos policy policy-name
Parameters policy-name
Policy name.
Example Define a policy named as 3COM.
[3Com ] qos policy 3COM
[3Com -qospolicy-3COM]
View This command can be used in the following views:
■ System view
Description The policy cannot be deleted if it is applied on an interface. It is necessary to remove
application of the policy on the current interface before deleting it via the
undo qos
policy
command.
policy-name should not be the policy defined by the system. The “default” is the
policy defined by the system.
Related Commands ■ classifier behavior
■ qos apply policy